Dimka 1.1.37 (a)

Dimka 1.1.37 (a) - TomSoft For IGO8.3.xxxx

Current version 1.1.37 (a)

The existing functions and appearance of the author Dimka was gradually added and modified:

+ Larger Font data for navigation
+ Green - yellow arrows for maneuvers
+ Digital tachometers with SpeedLimit, including radar and night mode
Digital + hours, including night mode (in both resolutions)
+ Back red-green arrows on the lanes (in both resolutions)
+ Comeback of functional option to view or not background under pointers with maneuvers.
+ Option on / off status indication including "Auto. Recalculation of route" + Longclick
+ Option on / off indication of the state, including "alert on radar" + Longclick
+ Added ability to remove other transit point to one LongClick (LongClick maneuvers on the arrow to be removed first added transit point)
+ Added ability to optionally show the icon for radar and automatic conversion
+ Added ability to optionally display a classic compass needle
+ In the menu "Search" added the option to navigate directly to 1 and 2 Favorite targets
+ Added ability to navigate to the objective, the passage or continue Favorites and History
+ Added ability to separately adjustable tilt the map in the direction signs
+ Adjustment of function "radars"
+ Fast menu navigation and route planning
+ Added the option in one of the variable data fields display the route
+ Added color arrows in the information board
+ Added information about the position in the GPS clock
+ Patch to draw arrows on the directional signs
+ Added calculating fuel consumption
+ Option to set the icon for the computing fuel consumption
+ Exchange image for the button "phone" in the cockpit
+ Add a VGA and WVGA image for speed alert
+ Radical change in appearance (the cockpit) for the HD version (400x240 only)
+ Add a new option in settings "TomSoft" for OFF / ON additional information about TMC (any resolution) (thanks Lakva)
+ Added ability to change the transparency by user based all his data sheet (400x240 only)
+ Add additional positions in the cockpit bottom bar, where you can start to plan a route (400x240 only)
+ Added and updated manual for Dimka skin TomSoft
+ Digital fonts
+ Integrated screen saver by WertVRV
+ Adding a 2D preview before the next turn (default off)
+ Adding the possibility of the route at the start iGO (default off)
+ Adding MapChanger
+ Compatibility with version 8.3.4.102xxx
+ Adding Country Info
+ Beautiful images for enhanced camera warning (only in versions 8.3.4.xxxx) - (by Harweyko)

WVGA version (480x800 a 800x480)

Installation is the same as usual, copy the downloaded ZIP file to a folder on the SD card
IGO8\CONTENT \SKIN, but only minor modifications described here.
Since writing the entire skin from scratch is really unnecessary, and so I used a little ruse.
If you look in to the ZIP file skin, not the folder 800_480 is there. There are only 240_400 and 400_240,
but then there is also an ingredient VGA, where are all the necessary images for 800x480 and 480x800.
And if you run the skin on the HD device, automatically loads the VGA graphics directories.
Automatically it will not, we will have to slightly modify SYS.TXT.
It's necessary to respect some rules.

I attach SYS.TXT.
I leave that equipment is normally runing as the portrait and after IGO start will be rotated to landscape by the sys.txt. I have try a several times and I had to prepare a SYS.TXT with preset parameters. Do not change!
Parameters are of particular importance:
Any orientation, optional in the IGO - applies only to the HD version of the skin
[interface]
vga=1

[rawdisplay]
highres=1
driver="GDI"

If you type eg highres = 0, it will try to IGO run graphics directly from folders 800x480. Skin is made so that section is in the 240x400 graphics components and the rest is needed in the VGA, which has already started in full VGA for HD. SYS.TXT - universal download below.

QVGA and VGA version (240x320, 320x240 + VGA 480x640 and 640x480)
Installation is the same as usual, copy the downloaded ZIP file to a folder on the SD card
IGO8 \ CONTENT \ SKIN, but only minor modifications described here.

480x272 QVGA version (480x272)
Installation is the same as usual, copy the downloaded ZIP file to a folder on the SD card
IGO8 \ CONTENT \ SKIN, but only minor modifications described here.

Digi Fonts (common to all the resolution)
Extract the downloaded file into the folder IGO8 \
After unpacking must be in the IGO8 folder on the SD card Font. Then just select digital fonts directly in the skin

Map Changer is used to change MAP folder (you need to restart, but everything will take care of skin)
The downloaded file "map_changer_tom.zip" is to expand the iGO8 folder on the SD card.
To ensure the path to the file .. "\iGO8\MapChanger\MapChanger.exe"

Example ...
In the directory "MAP" I saved the maps from TA
In the directory "MAP_NQ" I kept the same map, but from the NQ
Function Map Changer them switch and I need not manually move or otherwise change.
It is possible to switch between the four manufacturers, or MAP between the four sets of different countries
---------------
In SYS.TXT add...

[switchmap]
changer="\Storage Card\iGO8\MapChanger\MapChanger.exe"
1=",map_ta,\Storage Card\iGO8,\Storage Card\iGO8,"
2=",map_nt,\Storage Card\iGO8,\Storage Card\iGO8,"
3=",map_ot,\Storage Card\iGO8,\Storage Card\iGO8,"
4=",map_us,\Storage Card\iGO8,\Storage Card\iGO8,"

Bold line is of course possible (necessary) adjusted by the name of your SD card or the name of the folder iGO8 on your SD card.

---------------

Create folders in \IGO8\

iGO8\MapChanger\ = for this files (MapChanger.exe, MapChanger.nfrun)

and next folders for maps files

iGO8\content\map = TelaAtlas
iGO8\content\map_nt = NavTeq
iGO8\content\map_ot = Other
iGO8\content\map_us = Users

---------------
ATTENTION:
Each folders (map, map_nt, map_ot, map_us) MUST contain at least one map (one. FBL file)

Dimka-1.1.37-(a)---TomSoft-234-(480x234)

Dimka-1.1.37-(a)---TomSoft-272-(480x272)

Dimka-1.1.37-(a)---TomSoft-(240x320-and-320x240-+-VGA-480x640-and-640x480)

Dimka_1.1.37_(a)_-_TomSoft_HD_(800x480_and_480x800)_+_(240x400_and_400x240)

digi_font

map_changer_tom

truck_profiles